PhD. University of Utah, Salt Lake City, Utah, United States, 2016
MS, Kyoto University, Kyoto, Japan, 2007
BS, Okayama University, Okayama, Japan, 2005

Assistant Professor (March 2021 ~ Present), Seoul National University of Science and Technology, Seoul, South Korea
Senior Researcher (Sept. 2017 ~ Feb. 2021), Korea Institute of Ocean Science and Technology (KIOST), Busan, South Korea
Research Fellow (Jan, 2016 ~ Sep. 2017), National University of Singapore (NUS), Singapore
Structural Engineer (March, 2007 ~ April, 2010), Dongbu Engineering, Seoul, South Korea

Structural Engineering (Engineering Structures and Construction Materials)

[1] MO Kim, JK Park, TH Han, J Seo, and S Park*, Influence of Polyethylene Terephthalate Powder on Hydration of Portland Cement, Polymers, MDPI, Vol. 13, 31 July 2021, 2551.
[2] MO Kim, HK Lee, and HK Kim*, Cost and environmental effects of ocean-borne plastic flakes in cement mortar considering equivalent-strength mix design, Construction and Building Materials, Elsevier, Vol. 291, July 2021, 123267.
[3] JK Park and MO Kim*, The effect of different exposure conditions on the pull-off strength of various epoxy resins, Journal of Building Engineering, Elsevier, Vol. 38, June 2021, 102223.
[4] S Park, JK Park, NK Lee, and MO Kim*, Exploring Structural Evolution of Portland Cement Blended with Supplementary Cementitious Materials in Seawater, Materials, MDPI, Vol. 14, 4 March 2021, 1210.
[5] VD Truong, MO Kim, and DJ Kim*, Feasibility study on use of waste fishing nets as continuous reinforcements in cement-based matrix, Construction and Building Materials, Elsevier, Vol. 269, February 2021, 121314.
[6] JK Park, DJ Kim, and MO Kim*, Mechanical behavior of waste fishing net fiber-reinforced cementitious composites subjected to direct tension, Journal of Building Engineering, Elsevier, Vol. 33, January 2021, 101622.
[7] S Kim, H Hong, JK Park, S Park, SI Choi, and MO Kim*, Effect of Exposure Conditions on the Interfacial Bond Properties of SS400 Plate Coated with Various Epoxy Resins, Coatings, MDPI, Vol. 10, 28 November 2020, 1159.
[8] JK Park and MO Kim*, Mechanical Properties of Cement-Based Materials with Recycled Plastic: A Review, Sustainability, MDPI Vol. 12, 30 October 2020, 9060.
[9] JK Park, MO Kim*, and DJ Kim, Pullout behavior of recycled waste fishing net fibers embedded in cement mortar, Materials, MDPI, Vol. 13, 21 September 2020, 4195.
[10] Y Jeong, SH Kang, MO Kim, and J Moon*, Acceleration of cement hydration by hydrophobic effect from supplementary cementitious materials: Performance comparison between silica fume and hydrophobic silica, Cement and Concrete Composites, Elsevier, Vol. 112, September 2020, 103688.
[11] MO Kim*, Influence of polymer types on the mechanical properties of polymer-modified cement mortars, Applied Sciences, MDPI, Vol. 10, 05 February 2020, 1061.
[12] S Kim, H Hong, TH Han, and MO Kim*, Early-age tensile bond characteristics of epoxy coatings for underwater applications, Coatings, MDPI, Vol. 9, 14 November 2019, 757.
[13] B Won, MO Kim*, S Park, and JH Yi, Effects of water exposure on the interfacial bond between an epoxy resin coating and a concrete substrate, Materials, MDPI, Vol. 12, 11 November 2019, 3715.
[14] SH Kang, Y Jeong, MO Kim*, and J Moon*, Pozzolanic reaction on alkali-activated Class F fly ash for ambient condition curable structural materials, Construction and Building Materials, Elsevier, Vol. 218, 10 September 2019, pp. 235–244.
[15] D Jiang, KH Tan*, CM Wang, KCG Ong, H Bra, J Jin, and MO Kim, Analysis and design of floating prestressed concrete structures in shallow waters, Marine Structures, Elsevier, Vol. 59, 31 May 2018, pp. 301-320.
[16] NK Lee, KT Koh, MO Kim, and GS Ryu*, Uncovering the role of micro silica in hydration of ultra-high performance concrete (UHPC), Cement and Concrete Research, Elsevier, Vol. 104, 1 February 2018, pp. 68-79.
[17] NK Lee, KT Koh, MO Kim, GH Ahn, and GS Ryu*, Physicochemical changes caused by reactive MgO in alkali-activated fly ash/slag blends under accelerated carbonation, Ceramics International, Elsevier, Vol. 43, 15 October 2017, pp.12490-12496.
[18] MO Kim*, AC Bordelon, and NK Lee, Early-age crack widths of thin fiber reinforced concrete overlays subjected to temperature gradients, Construction and Building Materials, Elsevier, Vol. 148, 1 September 2017, pp. 492–503.
[19] MO Kim* and AC Bordelon, Age‒dependent properties of fiber‒reinforced concrete for thin concrete overlays, Construction and Building Materials, Elsevier, Vol. 137, 15 April 2017, pp. 288–299.
[20] H Justnes*, MO Kim, S Ng, and X Qian, Methodology of calculating required chloride diffusion coefficient for intended service life as function of concrete cover in reinforced marine structures, Cement and Concrete Composites, Elsevier, Vol. 73, October 2016, pp. 316–323.
[21] MO Kim* and A Bordelon, Fiber effect on interfacial bond between concrete and fiber‒reinforced mortar, Transportation Research Record: Journal of the Transportation Research Board, Vol. 2591, 3 October 2016, pp. 11‒18.
[22] J Moon, Z Wang, MO Kim, and S Chun*, Strength enhancement of alkaline activated fly ash cured at ambient temperature by delayed activation of substituted OPC, Construction and Building Materials, Elsevier, Vol. 122, 30 September 2016, pp. 659‒666.
[23] MO Kim, AC Bordelon*, U Ramasamy, and CP Pantelides, Base geometry influence on impact load failure of a traffic signal pole, Engineering Structures, Elsevier, Vol. 123, 15 September 2016, pp. 482‒489.
[24] MO Kim*, AC Bordelon, MK Lee, and BH Oh, Cracking and failure of patch repairs in RC members subjected to bar corrosion, Construction and Building Materials, Elsevier, Vol. 107, 15 March 2016, pp. 255‒263.