1997.03 - 2005.02 Dept. of Architectural Eng., Pusan National Univ., Korea, B.S.
2005.03 - 2007.02 Dept. of Architecture and Architectural Eng., Seoul National Univ., Korea, M.S.
2007.03 - 2012.02 Dept. of Architecture and Architectural Eng., Seoul National Univ., Korea, Ph.D.

2023.01 – Present: Korea Institute for Structural Maintenance and Inspection, Member of Board of Directors
2022.12 – 2024.08: U-Construction Management and Engineering Research Center, Director of the Center
2021.11 – 2023.12: Headquarters of Employment and Career, Vice Director of the Headquarters
2021.11 – 2023.12: Career Support Center, Director of the Center
2021.01 – 2022.12: Korean Society for Engineering Education, Member of Board of Directors
2021.01 – 2022.12: Korea Concrete Institute, Member of Board of Directors
2020.03 – Present: Architectural Engineering Program (Accreditation Board for Engineering Education of Korea, ABEEK) of Seoul National University of Science and Technology, Program Director
2018.09 – Present: School of Architecture (Architectural Engineering Program) at Seoul National University of Science and Technology, Associate Professor, Full Professor
2015.03 – 2018.08: School of Civil Engineering at Shandong Jianzhu Univ. & Shandong Provincial Key Laboratory of Appraisal and Retrofitting in Building Structures, Associate Professor
2012.10 – 2015.02: Samsung C&T Cooperation, Engineering & Construction Group, Senior Researcher for Building and Plant Structures
2012.03 – 2012.06: Engineering College at Kyunghee Univ., Lecturer
2012.03 – 2012.09: Dept. of Architecture and Architectural Eng. at Seoul National Univ., Postdoctoral Researcher of BK21 (Brain Korea 21 Program)

RC, PC and Composite Structures, Seismic Design, and Long-term Behavior (Creep and Shrinkage)

RC Structures, Structural Experiments and Performance Evaluation, Digital Structural Engineering, Capstone Design, Advanced RC Structures, Seismic Evaluation of Existing RC Buildings, Advanced Engineering Mathematics, Introduction of Building Structures

1. Mahdi Rafieizonooz, Hyounseung Jang, Jimin Kim, Chang-Soo Kim, Taehoon Kim, Seunghwan Wi, Saeed Banihashemi, Elnaz Khankhaje (2024). “Performances and properties of steel and composite prestressed tendons – A review.” Heliyon, 11, e31720.
2. Fahimeh Yavartanoo, Taehoon Kim, Jimin Kim, Hyounseung Jang, Chang-Soo Kim* (2024). “Out-of-plane behavior of U-shaped unreinforced masonry structures.” Journal of Building Engineering, 86, 108984.
3. Pham Toan Thang, Handon Kim, Changsoo Kim, Hyounseung Jang, Taehoon Kim, Jimin Kim (2024). “Free vibration analysis of barrel-shaped sandwich shells with auxetic honeycomb core using modified thick shell theory.” Aerospace Science and Technology, 145, 108861.
4. Elnaz Khankhaje, Taehoon Kim*, Hyounseung Jang, Chang-Soo Kim, Jimin Kim, Mahdi Rafieizonooz (2024). “A review of utilization of industrial waste materials as cement replacement in pervious concrete: An alternative approach to sustainable pervious concrete production.” Heliyon, 10(4), e26188.
5. Gia Toai Truong, Seon-Woo Baek, Ho Im, Chang-Soo Kim* (2024). "Fire resistance of axially loaded semi-precast composite columns." Structures, 59, 105697.
6. Elnaz Khankhaje, Taehoon Kim*, Hyounseung Jang, Chang-Soo Kim, Jimin Kim, Mahdi Rafieizonooz (2023). “Dataset on the assessment of pervious concrete containing palm oil kernel shell and seashell in heavy metal removal from stormwater.” Data in Brief, 50, 109570.
7. Pham Toan Thang, Chang-Soo Kim, Ji-Min Kim* (2023). “Free vibration analysis of bi-directional functionally graded cylindrical shells with varying thickness.” Aerospace Science and Technology, 137, 108271.
8. Pham Toan Thang, Chang-Soo Kim, Hyoun-Seung Jang, Tae-Hoon Kim, Ji-Min Kim* (2023). “Buckling behavior analysis of hybrid-honeycomb sandwich cylindrical shells.” Ocean Engineering, 276, 114214.
9. Elnaz Khankhaje, Taehoon Kim*, Hyounseung Jang, Chang-Soo Kim, Jimin Kim, and Mahdi Rafieizonooz (2023). “Properties of pervious concrete incorporating fly ash as partial replacement of cement: A review.” Developments in the Built Environment 14, 100130.
10. Gia Toai Truong, Kyoung-Kyu Choi, Tri-Hai Nguyen, and Chang-Soo Kim* (2023). “Prediction of shear strength of RC deep beams using XGBoost Regression with Bayesian Optimization.” European Journal of Environmental and Civil Engineering.
11. Gia Toai Truong, Kyoung-Kyu Choi, and Chang-Soo Kim* (2022). “Implementation of boosting algorithms for prediction of punching shear strength of RC column footings.” Structures, 46, 521–538.
12. Chang-Soo Kim, Woo-Bin Jo, Seon-Woo Baek, and Hyeon-Jong Hwang* (2022). “Seismic Performance of Semi-precast Composite Columns with Bolted End-plate Connections to Footing.” Engineering Structures, 259, 114174.
13. Gia Toai Truong, Kyoung-Kyu Choi, and Chang-Soo Kim* (2022). “Punching shear strength of interior concrete slab-column connections reinforced with FRP flexural and shear reinforcement.” Journal of Building Engineering, 46(1), 103692.
14. Chang-Soo Kim, Hong-Gun Park, and Gia Toai Truong* (2022). “Column-to-beam flexural strength ratio for performance-based design of RC moment frames.” Journal of Building Engineering, 46(1), 103645.
15. Gia Toai Truong, Hyeon-Jong Hwang, and Chang-Soo Kim* (2022). “Assessment of punching shear strength of FRP-RC slab-column connections using machine learning algorithms.” Engineering Structures, 255(15), 113898.
16. Tan-Van Vu*, Huu-Loi Cao, Gia-Toai Truong, and Chang-Soo Kim* (2023). “Buckling analysis of the porous sandwich functionally graded plates resting on Pasternak foundations by Navier solution combined with a new refined quasi-3D hyperbolic shear deformation theory.” Mechanics Based Design of Structures and Machines, 51(11), 6227-6253.
17. Gia Toai Truong, Chang-Soo Kim, and Kyoung-Kyu Choi* (2022). “Punching shear strength of RC column footings considering soil–footing friction.” Structures, 36, 314-329. Feb
18. Hyeon-Jong Hwang and Chang-Soo Kim* (2021), “Simplified Plastic Hinge Model for Reinforced Concrete Beam-Column Joints with Eccentric Beams.” Applied Sciences, 11(3), 1303.
19. In-Rak Choi and Chang-Soo Kim* (2021), “Push-Out Tests on Various Steel Anchors with Partial-Length Welding in Steel-Concrete Composite Members.” Applied Sciences, 11(1), 105.
20. Chang-Soo Kim, Yu Gong, Xin Zhang, and Hyeon-Jong Hwang* (2020). “Experimental Study on Long-term Behavior of RC Columns subjected to Sustained Eccentric Load.” Advances in Concrete Construction, 9(3), 289-299.
21. Hyeon-Jong Hwang, Jae‑Yo Kim, Jang-Woon Baek, and Chang-Soo Kim* (2019). “Prediction of Bond Performance of Tension Lap Splices using Artificial Neural Networks.” Engineering Structures, 198(1), 1-11.
22. Ho-Jun Lee, Hong-Gun Park*, Hyeon-Jong Hwang, and Chang-Soo Kim (2019). “Cyclic Lateral Load Test for RC Column-Steel Beam Joints with Simplified Connection Details.” Journal of Structural Engineering, ASCE, 145(8), 04019075-1-12.
23. Hyeon-Jong Hwang, Thomas H.-K. Kang*, and Chang-Soo Kim (2019). “Numerical Model for Flexural Behavior of RC Members Subjected to Low-Velocity Impact Loads.” ACI Structural Journal, 116(2), 65-76.
24. Tae‑Sung Eom, Chang‑Soo Kim, Xin Zhang, and Jae‑Yo Kim* (2019). “Time‑Dependent Deformations of Eccentrically Loaded Reinforced Concrete Columns.” International Journal of Concrete Structures and Materials, 13(2), 211-222.
25. Hyeon-Jong Hwang, Gao Ma, and Chang-Soo Kim* (2019). “Minimum Thickness of Flat Plates Considering Construction Load Effect.” Structural Engineering and Mechanics, 69(1), 1-10.
26. Xiangguo Wu, Xinlei Xia, Thomas H.-K. Kang, Jingcheng Han, and Chang-Soo Kim* (2018). “Flexural Behavior of Precast Concrete Wall - Steel Shoe Composite Assemblies with Dry Connection.” Steel and Composite Structures, 29(4), 545-555.
27. Chang-Soo Kim* and Yu Gong (2018). “Numerical Investigation of Creep and Shrinkage Effects on Minimum Reinforcement of Concentrically and Eccentrically Loaded RC Columns.” Engineering Structures,174, 509–525.
28. Xiangguo Wu, Thomas H.-K. Kang, Issa Brown Mpalla, and Chang-Soo Kim* (2018). “Axial Load Testing of Hybrid Concrete Columns Consisting of UHPFRC Tube and Normal-strength Concrete Core.” International Journal of Concrete Structures and Materials, 12(43).
29. Chang-Soo Kim and Hyeon-Jong Hwang* (2018). “Numerical Investigation on Load-carrying Capacity of High-strength Concrete-encased Steel Angle Columns.” International Journal of Concrete Structures and Materials, 12(11).
30. Chang-Soo Kim, Hong-Gun Park, Ho-Jun Lee, In-Rak Choi*, and Kyung-Soo Chung (2017). “Eccentric Axial Load Test for High-strength Composite Columns of Various Sectional Configurations.” Journal of Structural Engineering, ASCE, 143(8), 04017075-1-14.
31. In-Rak Choi, Kyung-Soo Chung, and Chang-Soo Kim* (2017). “Experimental Study on Rectangular CFT Columns with Different Steel Grades and Thicknesses.” Journal of Constructional Steel Research, 130, 109-119.
32. Chang-Soo Kim, Ho-Jun Lee, Chan-Kyu Park, Hyeon-Jong Hwang, and Hong-Gun Park* (2017). “Cyclic Loading Test for Concrete-filled Hollow Precast Concrete Columns produced by using New Fabrication Method.” Journal of Structural Engineering, ASCE, 143(4), 04016212-1-13.
33. Chang-Soo Kim, Hong-Gun Park*, In-Rak Choi, and Kyung-Soo Chung (2017). “Effect of Sustained Load on Ultimate Strength of High-Strength Composite Columns Using 800-MPa Steel and 100-MPa Concrete.” Journal of Structural Engineering, ASCE, 143(3), 04016189-1-16.
34. Chang-Soo Kim, Woo-Young Lim, Hong-Gun Park*, and Jung-Keun Oh (2016). “Cyclic Loading Test for Cast-in-place Concrete-filled Hollow Precast Concrete Columns.” ACI Structural Journal, 113(2), 205-215.
35. Chang-Soo Kim, Hong-Gun Park*, Kyung-Soo Chung, and In-Rak Choi (2014). “Eccentric Axial Load Capacity of High-Strength Steel-Concrete Composite Columns of Various Sectional Shapes.” Journal of Structural Engineering, ASCE, 140(4), 04013091-1-12.
36. Chang-Soo Kim*, Hong-Gun Park, Kyung-Soo Chung, and In-Rak Choi (2012). “Eccentric Axial Load Testing for Concrete-Encased Steel Columns using 800MPa Steel and 100MPa Concrete.” Journal of Structural Engineering, ASCE, 138(8), 1019-1031.
37. Tae-Sung Eom, Hong-Gun Park, Chang-Soo Kim, and Jin-Koo Kim* (2011). “Adaptive Linear Analysis for Inelastic Seismic Design of Reinforced Concrete Moment Frames.” Magazine of Concrete Research, 63(11), 847-860.

1. Semi-precast Composite Foundation (Registration No. 10-2472057) (Korea)
2. Apparatus to Measure Lateral Pressure of Concrete and Evaluation Method of Formwork Pressure Using the Same (Registration No.10-1651532) (Korea)
3. Dry-splicing Methods for Hollow Precast Concrete-encased Steel Columns (Registration No.10-1637451) (Korea)
4. Manufacturing Method for Hollow Precast Concrete-encased Steel Columns (Registration No.10-1626428) (Korea)
5. Double Wall Structure and Connecting Method using the Same (Registration No.10-1610189) (Korea)
6. Hybrid Vibration Isolation Structure for Easy Maintenance and Construction Method Thereof (Registration No.10-1606721) (Korea)
7. Reformed Concrete-filled Tube Column Structure (Registration No.10-1577704) (Korea)
8. Half-PC Column using Light-weight Encased Inner Form and Manufacturing Method Thereof, and Construction Method using the Same (Registration No.10-1570484) (Korea)
9. Half Precast Concrete Column Manufacturing Method using Saddle-type Ties and Dual Hoops and Constructing Method using the Same (Registration No.10-1458435) (Korea)
10. Half Precast Concrete Column Manufacturing Method using Prefabricated PC panels and Constructing Method using the Same (Registration No.10-1458434) (Korea)
11. Hollow Core PC Composite Column for SRC Columns and SRC Structures using the Same (Registration No.10-1415253) (Korea)
12. Rigid Joint of CFT Column and Steel Beam by Horizontal Welding Diaphragm of Flange Plates and Connecting Bars (Registration No.10-1402958) (Korea)
13. Steel-Concrete Composite Structure using Lattice Member and Method for Manufacturing the Same (Registration No.10-1274999) (Korea)
14. Prefabricated Composite Column for Large-sized Columns and Joint Structure with Steel Beam using the Same (Application No.10-2014-0091811) (Korea)
15. Spiral Shear Reinforcement Units with Double Rotations (Application No. 10-2022-0108039) (Korea)

2024.09-2027.08 [PI] Development of Mechanics-informed Machine Learning Model for Performance-based Design of RCS Joints in Semiconductor FAB (NRF)
2023.08 - 2024.05 Development of Design Criteria for Nonstructural Elements in Military Protection Facilities (Defense Installations Agency)
2023.07 - 2023.12 Improvement of Effectiveness for Safety Inspection of Apartment Houses (KALIS and KSMI)
2023.03 - 2023.12: Invigoration of Disclosure of Seismic Performance of Private Buildings (KALIS and AIK)
2022.06 - 2025.02 Basic Research Lab for Digital Mapping-based Platform for Healthy Construction Life Cycle (National Research Foundation of Korea)
2022.05 - 2022.12: Guidelines for Design and Maintenance of Glass Structures (MOLIT and AIK)
2021.12 - 2022.10: Structural Performance Evaluation of Low-carbon Concrete (Samsung C&T, KCI)
2021.09 - 2022.08: [PI] International Joint Research on Buckling Analysis of Porous Sandwich Functionally Graded Plates (SeoulTech)
2021.06 - 2021.11: Improvement of Manual and Establishment of Cost Standard for Building Management and Inspection, KALIS and KCI
2021.04 - 2022.12: [PI] Development of Practical Details and Simple Design Package for Shear Reinforcement Units to Improve Load Transfer Performance between Upper and Lower Walls with In-plane and Out-of-plane Offsets in Mid- and Low-rise Piloti Structures (KAIA, Soongsil Univ., Daeju E&C)
2021.04 - 2021.12: [PI] Guideline for Performance-based Design of RCS Connections (KCI)
2021.03 - 2022.02: Project of Research and Information Center for Innovative Engineering Education (KSEE)
2020.11 - 2021.10: Development of Seismic Design Code for Composite Structures, Commentary, and Nonlinear Analysis Modeling Guidelines (AIK)
2020.11 - 2021.06: Serviceability Assessment of Godeok Gangil 10 Block for Temperature Effect (DL E&C, Changminwoo Structural Consultants, KCI)
2020.07 - 2021.09: Management Project for Seismic Retrofit of School Facilities (Stage 2) (Seoul Metropolitan Office of Education, KOIES)
2019.11 - 2020.10: Performance Evaluation of F10T Blind Bolt (Daewoo Bolt, KSSC)
2019.11 - 2020.08: Development of Guideline for Performance Evaluation of HPS Pile Wall (Yunjun Steel Technology, KSSC)
2019.11 - 2020.02: Development of Remote Education Contents for Invigoration of National Universities’ Network (Kumoh National Institute of Technology, Seoul National University of Science and Technology, Pusan National University)
2019.10 - 2020.06: [PI] Development of Steel Assemblies for Column-to-Foundation Connection to Reduce Foundation Thickness and to Replace Reinforcing Bars (POSCO, KSSC)
2019.07 - 2019.12: Establishment of Guidelines for Safety Inspection, Standard Costing, and Report Evaluation for Apartment Buildings (KISTEC, KSMI)
2019.03 - 2022.02: [PI] Development of Half Precast Composite Structure System and Design Guide (National Research Foundation of Korea)
2018.09 - 2019.08: Development of Seismic System for Terracotta Facade (DASCO, KSSC)
2018.01 - 2018.08: [PI] Realistic Assessment of Creep, Shrinkage, and Temperature Effects in Reinforced Concrete Structures (National Natural Science Foundation of China)
2017.06 - 2018.04: Estimation of Expansion Joint Spacing to Prevent Temperature Cracks in Concrete Slabs (Lotte E&C, Seoul National Univ.)
2017.01 - 2017.12: [PI] Performance-based Design for Steel Reinforcement of High-strength Columns (National Natural Science Foundation of China)
2014.03 - 2015.02: [PI] Development of Form-integrated Large Column Methods to Reduce Construction Period of Framework in High-tech Buildings (Samsung C&T)
2012.10 - 2013.06: [PI] Development of Half-Precast Concrete Column Methods to Reduce Construction Period (Samsung C&T)

Korean Concrete Institute (Committee Members for Composite Structures, Precast Concrete, Seismic Design, IJCSM, Conference, Advancement, Informatization, Institutional Improvement, and KCS (Korean Construction Specification))
Architectural Institute of Korea (Committee Members for KDS (Korean Design Standard), KBC in English, and Modular Industrialization)
Korean Society of Steel Construction (Committee Member for Magazine)
Korea Institute for Structural Maintenance amd Inspection (Committee Member for Magazine)
Korean Society of Engineering Education (Information Center)
International Journal of Concrete Structures and Materials (Springer, SCIE): Editorial Board Member
Advances in Computational Design (Techno-Press, ESCI): Editorial Board Member