Introduction
Department
Academic Affairs
Admission
HOME > Department > Manufacturing Technology Convergence Program > Faculty
Introduction Faculty Curriculum
Manufacturing Technology Convergence Program
Name
Ho-Kyung Kim
MAJOR
Materials Strength and Structural Analysis
TEL
02-970-6348
E-mail
kimhk@seoultech.ac.kr
Biography
University of California, Irvine, Dept. of Aerospace and Mechanical Engineering, Ph.D
Careers
◾ Senior Engineer, Korea Institute of Industrial Technology(1993.1~1994.1)
◾ Senior Engineer, Hyundai Aerospace Co.(1994.2 - 1995. 2)
Research Areas
◾ High temperature creep and fatigue strength evaluation of material
◾ Development of mechanical property testing devices for smale structures
Teaching
◾ Mechanics of Materials, Automotive Materials, Structural Analysis of Automotive Components, Fatigue Analysis
Journal Papers
96. Fatigue strength of self-piercing riveted joints in lap-shear specimens of aluminum and steel sheets, Fatigue and Fracture of Engineering Materials and Structures, vol. 39, pp. 1105-1114 . 2016

95. Fatigue strength evaluation of self-piercing riveted Al 5052-H32 joints under mixed mode loading conditions, J. Korean Society of Safety, vol. 31, no. 3, pp.1-7, 2016.

94. Mechanical behavior of Sn-3.0Ag-0.5Cu/Cu solder joints after isothermal aging, Journal of Electronic Materials, vol. 45, no. 1, pp. 125-135, 2016.

93. Comparison of the fracture toughness of Cu6Sn5 intermetallic compound as measured by nanoindentation and other methods, Materials Letters, Vol. 162, pp. 185-190, 2016.

92. Evaluation of the impact shear strength of thermal aged lead-free solder ball joints, J. Korean Society of Safety, vol. 30, no. 6, pp.7-11, 2015.

91. The tensile impact properties of aged Sn-3Ag-0.5Cu/Cu solder joints, Microelectronics Reliability, Vol. 55, pp. 2808-2816, 2015.

90. High temperature crack growth behavior in a Cr-Mo steel weldment, International Journal of Engineering and Technology, Vol. 7, No. 5, pp. 2756-2761, 2015.

89. Multiaxial fatigue of a railway wheel steel, Journal of Engineering Science and Technology, Vol. 10, No. 9, pp.1216-1224, 2015.

88. Tensile-shear fatigue strength of self-piercing rivets joining dissimilar metal sheets, J. Korean Society of Safety, vol. 30, no. 4, pp. 1-7, 2015.

87. Fatigue strength evaluation of self-piercing riveted Al-5052 joints, J. Korean Society of Safety, ol. 30, no. 3, pp.1-6, 2015.

86. Fatigue strength evaluation of self-piercing riveted Al-5052 joints under different specimen configurations, Int. J of Fatigue, vol. 80, pp. 58-68, 2015.

85. Fatigue behavior of clinched joints in a steel sheet, Fatigue and Fracture of Engineering Materials and Structures, vol. 38, pp. 661-672. 2015.

84. Effect of thermal aging on the mechanical properties of Sn3.0Ag0.5Cu/Cu solder joints under high strain rate conditions, Journal of Electronic Materials, vol. 44, no. 7, pp. 2414-2421, 2015.

83. Construction and validation tests of a micro-impression creep test machine, International Journal of Engineering and Technology, vol. 6, no. 6 pp. 2756-2761, 2014.

82. Mechanical properties of lead-free solder joints under high-speed shear impact loading, Journal of Electronic Materials, 2014.

81. Design and development of a training apparatus for strain measurement, Global J. Eng. Education, vol.16, No.1, pp. 13- 19, 2014.

80. Three-dimensional elastic-plastic finite element analysis for wheel-rail rolling contact fatigue“, Int. J. of Eng. and Tech., vol.6, no.3 pp. 1593-1600, 2014.

79. Ho-Kyung Kim, “Evaluation of fatigue endurance for an ultra lightweight inline skate frame”, Adv. Mat. Research. vol. 739, pp. 431—436, 2013.

78. Ho-Kyung Kim, “Novel service lifetime estimation for an oil-damper rubber bush for a railway vehicle”, Adv. Mat. Research. vol. 739, pp. 437—441, 2013.

77. Taek-Young Kim and Ho-Kyung Kim, “Mixed-mode fatigue crack growth behavior of fully lower bainite steel”, Mat. Sci. & Eng. A580, pp. 322–329, 2013.

76. Woong Lim & Ho-Kyung Kim, “Design and development of a miniaturised tensile testing machine”, Global J. Eng. Education, vol. 15, No. 1, pp. 48- 53, 2013.

75. F. FERESHTEH-SANIEE, F. AKBARIPANAH, H.K. KIM and R.MAHMUDI, "Effects of extrusion and equal channel angular pressing on the microstructure, tensile and fatigue behaviour of the wrought magnesium alloy AZ80", Fatigue Fract Engng Mater Struct vol. 35, pp.1167–1172, 2013.

74. F. Akbaripanah, F. Fereshteh-Saniee, R. Mahmudi, H.K. Kim, "Microstructural homogeneity, texture, tensile and shear behavior of AM60 magnesium alloy produced by extrusion and equal channel angular pressing," Mat. and Design, vol. 43, pp.31–39, 2013.

73. C.Y. HYUN, H.K. Kim, "Grain size dependence of flow stress in ECAPed Ti with constant texture," Trans. Nonferrous Met. Soc. China vol. 22, s673−s677, 2012.

72. F. Akbaripanah, F. Fereshteh-Saniee, R. Mahmudi, H.K. Kim "The influences of extrusion and equal channel angular pressing (ECAP) processes on the fatigue behavior of AM60 magnesium alloy", Mat. Sci. & Eng. A, vol. 565, pp. 308–316. 2013.

71. In-Dong You, Ho-Kyung Kim, "Evaluation of the joint strength between Sn–3.0Ag–0.5Cu solders and Cu substrate at high strain rates," Mat. Sci. & Eng. A vol. 556, p. 551–557, 2012. 07.

70. Ho-Kyung Kim, "Fatigue strength evaluation of the clinched lap joints of a cold rolled mild steel sheet," J. of Mat. Eng. Perform, vol. 22(1), 294-299, 2013.

69. Ho-Kyung Kim, "The correlation between the impression and double shear creep of AZ31 magnesium alloy," Mat. Sci. Eng. A, vol. 551, p.1-6, 2012.

68. Chang-Young Hyun, Ho-Kyung Kim, "The comparison of yield and fatigue strength dependence on grain size of pure Ti produced by severe plastic deformation," Reviews on Advanced Materials Science, vol.28, p.69-73, 2011.

67. Se-Min Joo, Ho-Kyung Kim. “Shear deformation behavior of a Sn–3Ag–0.5Cu single solder ball at intermediate strain rates,” Mater. Sci. Eng. vol. A 528, p.2711–2717, 2011.

66. Ho-Kyung Kim, “Low-temperature creep behavior of ultrafine-grained 5083 Al alloy processed by equal-channel angular pressing,” J. Mech. Sci. Tech., vol. 24, no. 10, pp.2075-2081, 2010.

76. Chang-Young Hyun, Chong-Hyun Lee, Ho-Kyung Kim, "Microstructures and mechanical properties of ultrafine grained pure Ti produced by severe plastic deformation," Res. Chem. Intermed. vol. 36, pp.629-638, 2010.

65. Chang-Young Hyun, Ho-Kyung Kim, "Fatigue properties of a modified 7075 aluminum alloy containing scandium," J. Mat. Sci. vol.45, p, 3067-3072, 2010.

64. Ho-Kyung Kim, "Fatigue strength evaluation of the clinch joints of a cold rolled steel sheet, Int. J. Railway, vol.2, No.4, p.131-138, 2009.

70. Chin-Sung Chung, Ho-Kyung Kim, "Safety evaluation of the rocker arm of a diesel engine," Materials and Design v.31, p.940-945, 2010

63. Doo-Hwan Kim, Ho-Kyung Kim, “Fatigue strength evaluation of cross-tension spot weld joints of cold rolled mild steel sheet,” Materials and Design, v30 p3286–3290, 2009.

62. S.H. Kim, H. K. Kim “Multiaxial stress creep rupture mechanisms of AZ31 magnesium alloy," Int. J. of Automotive Tech., vol. 10, No. 3, p. 365−372, 2009.

61. Ho-Kyung Kim, "Creep deformation and crack growth rates of a super 2 titanium aluminide alloy." Materials and Design, v30, p2454-2459, 2009.

60. Ho-Kyung Kim, "The grain size dependence of flow stress in an AZ31 Mg alloy with a constant texture," Materials Science and Engineering A, v515, p66-70, 2009.

59. W.J. Kim, Y.K. Sa, H.K. Kim, U.S. Yoon, “Plastic forming of the equal-channel angular pressing processed 6061 aluminum alloy,” Materials Science and Engineering A v487, p.360-368, 2008.

58. W.J. Kim, J.K. Kim, H.K. Kim, J.W. Park, Y.H. Jeong, “Effect of post equal-channel-angular-pressing aging on the modified 7075 Al alloy containing Sc”, J. Alloys and Compounds, v450, p.222-228, 2008.

57. Ho-Kyung Kim, Hyun-Jun Kim, "Creep rupture mechanisms of 5083-Al alloy under multiaixial stress states," J. Mater. Sci. vol.43, pp2602-2610, 2008.

56. H.K. Kim, K.T. Yang, H.J. Kim, "Fatigue crack propagation behavior of fine-grained Al-5083 alloy produced by severe plastic deformation," J. Korean Society of Safety, v22, no. 2, p15-21, 2007.

55. H.K. Kim, K.T. Yang, H.J. Kim, "FEM analysis on rolling contact fatigue crack of a railway wheel," J. Korean Society of Safety, v22, no. 2, p8-14, 2007.

54. C.Y Hyun, H.K. Kim, "Fatigue crack growth of ultrafine grained pure Ti after severe plastic deformation," Solid State Phenomena, Vol. 124-126, pp. 1385-1388, 2007.

53. H.K. Kim, Y.I. Lee, S.M. Joo, "FEM analysis on temperature distribution and thermal stress of a brake drum for large commercial vehicle," J. Korean Society of Safety, v21, no. 6, p7-13, 2006.

52. H.K. Kim, D.H. Choi, K.T. Yang, "Fatigue strength evaluation of SPCC cross-tension spot weld joints," J. Korean Society of Safety, v21, no. 5, p17-21, 2006.

51. H.K. Kim, J.H. Park, K.T. Yang, D.H. Choi, "Fatigue crack growth behavior of gray cast iron for brake disc of a passenger car," J. Korean Society of Safety, v21, no. 4, p19-24, 2006.

50. Kyoung-Tak Yang, Ho-Kyung Kim, "Elevated temperature deformation behavior in an AZ31 magnesium alloy," J. Mechanical Science and Technology, Vol. 20, No.8, pp.1209-1216, 2006.

49. H.K. Kim, J.H. Park, D.H. Choi, K.T. Yang, "A study on FEM analysis and its endurance evaluation of an oil-damper rubber bush for a railway vehicle," J. Korean Society of Safety, v21, p15-21, 2006.

48. W.J. Kim, C.Y Hyun, H.K. Kim, "Fatigue strength of ultrafine-grained pure Ti after severe plastic deformation, " Scripta Materialia, v54, p1745-1750, 2006.

47. H.K. Kim, S.H. Kim C.Y. Hyun, "A study on the creep cavitation in an Ni3Al alloy using the hydrogen embrittlement technique," Praktische Metallographie, v42, p533-545, 2005.

46. Y.I. Lee, J.H. Park, D.H. Choi, M.I Choi, H.K. Kim, "Improvement of fatigue properties in ultrafine grained pure Ti," after ECAP," J. Korean Society of Mechanical. Eng. A, Vol.24, No.11, pp.1494-1502, 2005.

45. J.K. Kim, H.K. Kim, J.W. Park, W.J. Kim, "Large enhancement in mechanical properties of the 6061 Al alloys after a single pressing by ECAP," Scripta Materialia, v53, 6 p1207-1211, 2005.

44. C.S. Chung, D.K. Chun, H.K. Kim, "Fatigue properties of fine grained magnesium alloys after severe plastic deformation," J. Mechanical Science and Technology, Vol. 19, No.7, pp.1441-1448, 2005.

43. H.K. Kim, D.K. Chun, S.H. Kim, "High-temperature rupture of 5083-Al alloy under multiaxial stress states," J. Mechanical Science and Technology, Vol. 19, No.7, pp.1432-1440, 2005.

42. C.S. Chung, M.I. Choi, Y.I. Lee, H.K. Kim, "A study on thermal cracking of ventilated brake disk of a car using FEM analysis," J. Korean Society of Tribologists and Lub. Eng., Vol.21, pp.63-70, 2005.

41.Ho-Kyung Kim, Yong-In Lee and Chin-sung Chung, "Fatigue properties of a fine grained magnesium alloy produced by equal channel angular pressing," Scripta Materialia, v52, 6 p473-477, 2005.

40. Ho-Kyung Kim, "Activation energies for the grain growth of an AZ31 Mg alloy after equal channel angular pressing," J. Materials Science, vol 39, p7107-7109, 2004.

39. H.K. Kim and W.J. Kim, "Microstructural instability and strength of an AZ31 Mg alloy after severe plastic deformation," Materials Science and Engineering A, v385, p300-308, 2004.

38. H.K. Kim, K. Chung, C.Y Hyun, "Grain refinement and microstructural instability of an AZ31 Mg alloy by severe plastic deformation using ECA pressing," J. Korean Society for Heat Treatment, vol.17, no.3, p139-145, 2004.

37. H.K. Kim, C.S. Chung, B.S. Cha, B.H. Goo and C.Y. Hyun, "Mechanical properties and microstructures of an AZ31 Mg alloy through severe plastic deformation", Praktische Metallographie, v41, no.3 p142-155, 2004.

36. W.J. Kim, C.S. Chung, D.S. Ma, S.I. Hong, H.K. Kim, "Optimization of strength and ductility of 2024 Al by equal channel angular pressing (ECAP) and post-ECAP aging", Scripta Materialia, v49, 4 p333-338, 2003.

35. B.J. Kwon, H.C. Chung, H.K. Kim, "A study on stress distribution of Korean high speed train wheel at tread braking," J. Korean Society for Railway, vol.5, no.3, 167-173, 2002.

34. Ho-Kyung Kim, Myung-Il Choi, Chin-Sung Chung, Dong-Hyuk Shin, "Fatigue properties of ultrafine grained low carbon steel produced by equal channel angular pressing", Materials Science and Engineering, A340, n1-2, p243-250, 2003.

33. D.H. Lim, H.H. Rhyu, B.W. Lee, H.K. Kim, "An experimental study on the strength evaluation of Al-5052 tensile-shear specimens using a mechanical press joining method, J. Korean Society of Machine Tool Engineers, vol.12 no.1, p58-64, 2003.

32. B.N. Park, K.H. Kim H.K. Kim, "An evaluation method of fatigue strength and reliability in a railway wheel with an application of strength-stress interference model," J. Korean Society for Railway, vol. 5, no.2, p118-124, 2002.

31. H.K. Kim, M.I. Choi, C.S. Chung, D.H. Shin, "Fatigue crack growth behavior in ultrafine grained low carbon steel.", KSME International Journal, vol. 16 no. 10, p1246-1252, 2002.

30. C.S. Chung, J.K. Kim, H.K. Kim, W.J. Kim "Improvement of high-cycle fatigue life in a 6061 Al alloy produced by equal channel angular pressing." Materials Science and Engineering, A337, n1-2, p39-44, 2002.

29. C.S. Chung, B.S. Cha, H.K. Kim, "Optimum joining conditions in a mechanical press joint.", Materials and Manufacturing Processes, vol. 16, no.3, p387-403, 2001.

28. H.K. Kim, K. Chung, C.S. Chung, "A study on high temperature crack growth behavior in 2.25Cr-1Mo steel weldments at 550oC, " J. Korean Welding and Joining Society, vol. 19, no.3 p278-284, 2001.

27. H.K. Kim, B.W. Lee, K.T. Park, C.S. Chung, "Fatigue behavior of a lower bainite steel under mixed mode loading conditions," J. Korean Institute of Metals and Materials, vol. 39, no.4 ,p416-422, 2001.

26. Y.B. Lee, Y.K. Park, C.S. Chung, H.K. Kim, An experimental study on the strength evaluation of mechanical press joint," J. Korean Society of Mechanical. Eng. A, Vol.24, No.2,vol.24, no.2, p438-447, 2000.

25. H.K. Kim, C.H. Hyun, C.S. Chung, "Creep crack growth rates of Ti-25Al-10Nb-3V-1Mo alloy unde mixed mode conditions, J. Korean Institute of Metals and Materials, vol.38, no.1, p64-70, 2000.

24. H.K. Kim, C.Y. Hyun, C.S. Chung, "Steady-state creep behavior of a Ti-25Al-10Nb-3V-1Mo alloy.", Metals and Materials, vol.5, no.3, p263-266, 1999.

23. Y.B. Lee, C.S. Chung, Y.K. Park and H.K. Kim, "Effects of redistributing residual stress on the fatigue behavior of SS330 weldment.", International. Journal of Fatigue, v20 n6, p565-573, 1998.

22. Y.B. Lee, C.S. Chung, Y.K. Park, T.Y. Kim, H.K. Kim, S.H. Park, "Analysis of fatigue strength in expansion joint weldment of bridge," J. Korean Welding and Joining Society, vol.16, p73-82, 1998.

21. Y.B. Lee, C.S. Chung, Y. K. Park, H.K. Kim "A study on the prediction of fatigue crack growth rate in stainless steel weldments," J. Korean Society of Machine Tool Engineers, vol.7, no.3, p68-78, 1998.

20. H.K. Kim, K. Chung, C.S. Chung,"High temperature ruprure lifetime of 304 stainless steel under multiaxial stress states," J. Korean Society of Mechanical. Eng. A22, no.3, p595-602, 1998.

19.Y.B. Lee, C.S. Chung, Y.H. Kim, H.K. Kim, "A study on the fatigue crack propagation behavior of spot welds under tensile-shear load," J. Korean Society of Machine Tool Eng., vol.6, no.4, p27-33, 1997.

18. Y.B. Lee, C.S. Chung, H.K. Kim, N.I. Cho, S.H. Park, "A study on fatigue behavior considering effects of redistributing compressive residual stress and crack closure in SS330 weldment," J. Korean Society of Machine Tool Eng., vol. 6, no.2, p26-33, 1997.

17. H.K. Kim, K. Chung, "A study on the high temperature deformation behavior of a solid solution aluminum alloy," J. Korean Society of Mechanical. Eng. A, Vol.21, No.2, p346-351, 1997.

16. Kang Chung and Ho-Kyung Kim, "High temperature deformation and fracture mechanisms in a nickel aluminide alloy." KSME Journal, Vol 8. No. 4, p347-355, 1994.

15. K. Chung, D.H. Kim, H.K. Kim, "High temperature fracture behavior of a spray atomized and co-deposited intermetallic matrix composite.", J. Korean Society of Mechanical. Eng, vol.18, no.7 p1713-1721, 1994.

14. J. Wolfenstine, H.K. Kim and J.C. Earthman, "Elevated temperature deformation mechanisms in Ni3Al," Materials Science and Engineering, A192, p811-816, 1995.

13. J. Wolfenstine, H.K. Kim and J.C. Earthman, "Creep characteristics of single crystalline Ni3Al(Ta, B).", Metallurgical Transactions, 25A p2477-2482, 1994.

12. J. Wolfenstine, H.K. Kim and J.C. Earthman, "High temperature creep transitions in single crystalline Ni3Al(Ta, B).", Journal of Materials Research, v8, p2510-2514, 1993.

11. H.K. Kim and J.C. Earthman, "High temperature deformation and fracture mechanisms in a dendritic Ni3Al alloy," Acta Metallurgica et Materialia, v42 p679-687, 1994.

10. J. Wolfenstine, H.K. Kim and R.J. McCelland, "Dislocation substructure developed during creep of ceramic solid solution alloys.", Materials Letters, v14, p237-239, 1992.

9. H.K. Kim, J. Wolfenstine and J.C. Earthman, "Grain boundary sliding in Ni3Al(Ta, B) bicrystals.", Scripta Metallurgica et Materialia, v27, p1067-1072, 1992.

8. J. Wolfenstine, H.K. Kim and J.C. Earthman, "High temperature creep behavior of polycrystalline Ni3Al(Zr, B).", Scripta Metallurgica et Materialia, v26, p1823-1828, 1992.

7. X. Liang, H.K. Kim, J.C. Earthman and E.J. Lavernia, "Microstructure and elevated temperature behavior of a spray atomized and co-deposited Ni3Al/SiC/TiB2 intermetallic matrix composite.", Materials Science and Engineering, A153, p646-653, 1992.

6. H.K. Kim,J.C. Earthman and E.J. Lavernia, "Directional solidification of Ni3Al.", Acta Metallurgic et Materialia, v40, p637-647, 1992.

5. H.K. Kim,J.C. Earthman and E.J. Lavernia, "Primary dendrite arm spacings and tip radii in directional solidified Ni3Al.", Materials Science and Engineering, A152, p240-249, 1992.

4. H.K. Kim, E.J. Lavernia and J.C. Earthman, "Mechanisms of grain boundary cavitation in Ni3Al.", Acta Metallurgic et Materialia, v40, p1933-1943, 1992.

3. H.K. Kim, F.A. Mohamed and J.C. Earthman, "Noble specimen geometry for double shear creep experiments.", Journal of Testing and Evaluation, v19, p93-96, 1991.

2. H.K. Kim and F.A. Mohamed, "Effect of stress reduction ratio on the creep behavior of an Al-5% Ag alloy.", Materials Science and Engineering, A142, p145-155, 1991.

1. H.K. Kim, F.A. Mohamed and J.C. Earthman, "High temperature rupture of microstructurally unstable 304 stainless steel under uniaxial and triaxial stress states.", Metallurgical Transactions, 22A, p2629-2636, 1991.
◾ Fatigue strength of self-piercing riveted joints of carbon fiber reinforced composite and Al5052 alloy plates, Journal of Composite Materials, vol.57 No.22 pp.3479~3491, 2023김호경
◾ Fatigue strength evaluation of multi-point self-piercing riveted joints of Al6061 and cold-rolled steel sheets, European Journal of Advances in Engineering and Technology, vol.10 No.7 pp.32~39, 2023김호경
◾ Fatigue strength estimation of single self-piercing riveted joints of steel and aluminium plates under different loading modes, Int. J. Materials and Product Technology, vol.65 No.4 pp.333~357, 2022김호경
◾ Fatigue Strength Evaluation of Adhesive-Bonded and Self-Piercing Riveted Joints of Al-5052 and Cold Rolled Steel Sheets, European Journal of Advances in Engineering and Technology, vol.9 No.9 pp.9~15, 2022김호경
◾ Fretting Corrosion Behavior of Lubricated Electrical Contacts at Various Temperatures, European Journal of Advances in Engineering and Technology, vol.9 No.7 pp.44~50, 2022김호경
◾ Effects of Residual Stresses on the Fatigue Lifetimes of Self-Piercing Riveted Joints of AZ31 Mg Alloy and Al5052 Al Alloy Sheets, Metals, vol.11 No.12, 2021김호경
◾ Optimization Design of a Waterproof Seal Cross-Sectionof Automotive Electrical Connectors, 한국트라이볼로지학회지, vol.37 No.6 pp.224~231, 2021김호경
◾ Fatigue bending endurance evaluation of an automotive air conditioner hose, European Journal of Advances in Engineering and Technology, vol.8 No.9 pp.15~21, 2021김호경
◾ Fatigue strength of self-piercing riveted joints in lap-shear specimens of disimilar magnesium alloy sheets, European Journal of Advances in Engineering and Technology, vol.7 No.10 pp.40~46, 2020김호경
◾ Effect of Normal Forces on the Electrical Endurance of Tin-Plated Contacts Under Elevated Temperature Fretting Conditions, IEEE Transactions on Components, Packaging and Manufacturing Technology, vol.10 No.7 pp.1158~1165, 2020김호경
◾ Analysis of the cross-sectional shape and wiping angle of a wiper blade, SAE Int. J. Materials and Manufacturing, vol.13 No.2 pp.1~12, 2020김호경
◾ Micro-extrusion for a gear shaft, International Journal of Engineering Trends and Technology, vol.68 No.4 pp.13~17, 2020김호경
◾ A case study of abnormal heat generation of automobile engine connectors during a complex environmental tes, European J. of Advances in Eng. and Technology, vol.7 No.2 pp.34~40, 2020김호경
◾ Fatigue strength evaluation of self-piercing riveted joints of AZ31 Mg alloy and cold-rolled steel sheets, J of Magnesium Alloy, vol.8 No.1 pp.241~251, 2020김호경
◾ Fatigue strength of a tensile-shear loaded clinched joint made from an Al-5052 alloy sheet, International Journal of Engineering & Technology, vol.9 No.1 pp.252~257, 2020김호경
◾ Wear characteristics of lubricants with nano-diamond particles on a tool steel, J. of Engineering Science and Technology, vol.14 No.6 pp.3074~3084, 2019김호경
◾ Failure analysis of die casting pins for an aluminum engine block, Engineering Failure Analysis, vol.104 pp.690~703, 2019김호경
◾ Adhesive strength of primers for automotive repair painting under various roughness conditions, Journal of Engineering and Applied Science, vol.14 No.21 pp.7795~7799, 2019김호경
◾ Wear characteristics of diesel engine oils with nano-diamond particles on an Al-7075 alloy, European Journal of Advances in Engineering and Technology, vol.6 No.8 pp.17~22, 2019김호경
◾ 셀프 피어싱 리벳과 접착제를 이용한 이종재 접합부의 피로강도, 한국도시철도학회논문집, vol.7 No.2 pp.289~295, 2019김호경
◾ FEM Analysis of a Waterproof Seal of Automotive Electrical Connectors, 한국윤활학회지, vol.35 No.1 pp.52~58, 2019김호경
◾ A case study of contact failure of oil temperature sensor for automotive transmission, International Journal of Electrical and Electronics Research, vol.6 No.4 pp.28~32, 2018김호경
◾ Fatigue strength of Self-Piercing Riveted joints of steel and magnesium alloy sheets, Journal of Engineering and Applied Science, vol.12 pp.8441~8445, 2017김호경
◾ Effect of normal forces on fretting corrosion of tin-coated electrical contacts, Microelectronics Reliability, vol.79 pp.321~327, 2017김호경
◾ Fatigue life estimation of self-piercing riveted aluminum joints under mixed-mode loading, Int. J of Fatigue, vol.97 pp.20~28, 2017김호경
◾ Effects of temperature and span amplitude on fretting corrosion behavior of tin-plated electrical contacts, Microelectronics Reliability, vol.69 pp.80~87, 2017김호경
◾ Tribology behavior of a lubricant with nano-diamond particles on steel, International Journal of Engineering and Technology, vol.9 No.1 pp.169~174, 2017김호경
◾ Fatigue strength of self-piercing riveted joints in lap-shear specimens of aluminium and steel sheets, Fatigue and Fracture of Engineering Materials and Structures, vol.39 No.9 pp.1105~1114, 2016김호경
◾ Fatigue strength evaluation of self-piercing riveted cold rolled steel joints under mixed mode loading conditions, International Journal of Engineering and Technology, vol.8 No.4 pp.1826~1831, 2016김호경
◾ Effects of Lubricant on Fretting Corrosion of Tin-Coated Electric Contacts, 한국윤활학회지, vol.32 No.3 pp.88~94, 2016김호경
◾ Fatigue Strength Evaluation of Self-Piercing Riveted Al 5052-H32 Joints under Mixed Mode Loading Conditions, 한국안전학회지, vol.31 No.3 pp.1~7, 2016김호경
◾ Comparison of the fracture toughness of Cu6Sn5 intermetallic compound as measured by nanoindentation and other methods, Materials Letters, vol.162 pp.185~190, 2016김호경
◾ Mechanical Behavior of Sn-3.0Ag-0.5Cu/Cu Solder Joints After Isothermal Aging, Journal of Electronic Materials, vol.45 No.1 pp.125~135, 2016김호경
◾ The tensile impact properties of aged Sn-3Ag-0.5Cu/Cu solder joints, Microelectronics Reliability, vol.55 No.12 pp.2808~2816, 2015김호경
◾ Evaluation of the Impact Shear Strength of Thermal Aged Lead-Free Solder Ball Joints, 한국안전학회지, vol.30 No.6 pp.7~11, 2015김호경
◾ High temperature crack growth behavior in a Cr-Mo steel weldment, International Journal of Engineering and Technology, vol.7 No.5 pp.1799~1804, 2015김호경
◾ Fatigue strength evaluation of self-piercing riveted Al-5052 joints under different specimen configurations, Int. J of Fatigue, vol.80 pp.58~68, 2015김호경
◾ Multiaxial fatigue of a railway wheel steel, Journal of Engineering Science and Technology, vol.10 No.9 pp.1216~1224, 2015김호경
◾ Tensile-Shear Fatigue Strength of Self-Piercing Rivets Joining Dissimilar Metal Sheets, 한국안전학회지, vol.30 No.4 pp.1~7, 2015김호경
◾ Fatigue behaviour of clinched joints in a steel sheet, Fatigue and Fracture of Engineering Materials and Structures, vol.38 No.6 pp.661~672, 2015김호경
◾ Fatigue Strength Evaluation of Self-Piercing Riveted Al-5052 Joints, 한국안전학회지, vol.30 No.3 pp.1~6, 2015김호경
◾ Effect of Thermal Aging on the Mechanical Properties of Sn3.0Ag0.5Cu/Cu Solder Joints Under High Strain Rate Conditions, Journal of Electronic Materials, vol.44 pp.2414~2421, 2015김호경
◾ tests of a micro-impression creep test machine, International Journal of Engineering and Technology, vol.6 No.6 pp.2756~2761, 2014김호경
◾ Three-dimensional elastic-plastic finite element analysis for wheel-rail rolling contact fatigue, International Journal of Engineering and Technology, vol.6 No.3 pp.1593~1600, 2014김호경
◾ Mechanical Properties of Lead-Free Solder Joints Under High-Speed Shear Impact Loading, Journal of Electronic Materials, vol.43 No.11 pp.4171~4178, 2014김호경
◾ Fatigue Strength of Al-5052 Tensile-Shear Specimens using a SPR Joining Method, 한국안전학회지, vol.29 No.4 pp.9~14, 2014김호경
◾ Fretting Corrosion Behavior of Tin-plated Electric Connectors with Variation in Temperature, 한국윤활학회지, vol.30 No.3 pp.146~155, 2014김호경
◾ Fatigue Strength Evaluation of Mechanical Press Joints of Cold Rolled Steel Sheet under Cross-Tension Loading, 한국안전학회지, vol.29 No.3 pp.1~7, 2014김호경
◾ Fretting Corrosion Behavior of Silver-Plated Electric Connectors with Constant Displacement Amplitude, 한국윤활학회지, vol.30 No.2 pp.99~107, 2014김호경
◾ Creep deformation behaviour of AZ31 magnesium alloy over wide range of temperature and stress, MATERIALS AT HIGH TEMPERATURES, vol.31 pp.34~40, 2014김호경
◾ Mixed-mode fatigue crack growth behavior of fully lower bainite steel, Mat. Sci. & Eng. A, vol.580 pp.322~329, 2013김호경
◾ Fatigue Crack Growth Rates of a Railway Wheel Steel under Mixed Mode Loading Conditions, 한국안전학회지, vol.28 No.4 pp.8~13, 2013김호경
◾ Evaluation of Fatigue Endurance for an MTB Frame, 한국안전학회지, vol.28 No.3 pp.1~5, 2013김호경
◾ The influences of extrusion and equal channel angular pressing (ECAP) processes on the fatigue behavior of AM60 magnesium alloy, Mat. Sci. & Eng. A, vol.565 No.0 pp.308~316, 2013김호경
◾ Design and development of a miniaturised tensile testing machine, Global J. Eng. Education, vol.15 No.1 pp.48~53, 2013김호경
◾ Microstructural homogeneity, texture, tensile and shear behavior of AM60 magnesium alloy produced by extrusion and equal channel angular pressing, Materials and Design, vol.43 pp.31~39, 2013김호경
◾ Effects of extrusion and equal channel angular pressing on the microstructure, tensile and fatigue behaviour of the wrought magnesium alloy AZ80, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, vol.35 pp.1167~1172, 2012김호경
◾ Evaluation of the Joint Strength of Lead-free Solder Ball Joints at High Strain Rates, 한국안전학회지, vol.26 No.6 pp.7~13, 2012김호경
◾ Grain size dependence of flow stress in ECAPed Ti with constant texture, Transactions of Nonferrous Metals Society of China (English Edition), vol.22 No.3 pp.673~677, 2012김호경
◾ Evaluation of the joint strength between Sn-3.0Ag-0.5Cu solders and Cu substrate at high strain rates, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.556 pp.551~557, 2012김호경
◾ Peel-tension Fatigue Strength of Mechanical Press Joints of Cold Rolled Steel Sheet, 한국안전학회지, vol.27 No.5 pp.42~48, 2012김호경
◾ The correlation between the impression and double shear creep of AZ31 magnesium alloy, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.551 pp.1~6, 2012김호경
◾ Fatigue Behavior of Fine Grained AM60 Magnesium Alloy Produced by Severe Plastic Deformation, 한국안전학회지, vol.27 No.3 pp.15~19, 2012김호경
◾ Evaluation of Multiaxial Fatigue Strength of a Urban Railway Wheel Steel, 한국안전학회지, vol.27 No.2 pp.1~6, 2012김호경
◾ Estimation of Contact Fatigue Initiation Lifetime of an Urban Railway Wheel, 한국윤활학회지, vol.28 No.1 pp.19~26, 2012김호경
◾ Process and Strength Evaluation of Mechanical Press Joining, 한국안전학회지, vol.26 No.4 pp.1~6, 2011김호경
◾ THE COMPARISON OF YIELD AND FATIGUE STRENGTH DEPENDENCE ON GRAIN SIZE OF PURE Ti PRODUCED BY SEVERE PLASTIC DEFORMATION, REVIEWS ON ADVANCED MATERIALS SCIENCE, vol.28 No.1 pp.69~73, 2011김호경
◾ Estimation of Fatigue Damage Due to Rolling Contact ina Railway Wheel Using FEM Analysis, 한국안전학회지, vol.26 No.3 pp.1~7, 2011김호경
◾ Development of a Miniature Pendular Type Impact Testing Machine Using a Magnetic Powder Brake, 한국윤활학회지, vol.27 No.3 pp.140~146, 2011김호경
◾ Evaluation of Fatigue Endurance for an Ultra-light-weightInline Skate Frame, 한국안전학회지, vol.26 No.2 pp.1~5, 2011김호경
◾ Shear deformation behavior of a Sn-3Ag-0.5Cu single solder ball at intermediate strain rates, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.528 No.6 pp.2711~2717, 2011김호경
◾ Evaluation of Shear Strength of a Miniature Lead-freeSingle Solder Ball Joint, 한국안전학회지, vol.25 No.6 pp.14~21, 2010김호경
◾ Low-temperature creep behavior of ultrafine-grained 5083 Al alloy processed by equal-channel angular pressing, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.24 pp.2075~2081, 2010김호경
◾ Microstructures and mechanical properties of ultrafine grained pure Ti produced by severe plastic deformation, Research on Chemical Intermediates, vol.36 pp.629~638, 2010김호경
◾ Fatigue properties of a modified 7075 aluminum alloy containing scandium, JOURNAL OF MATERIALS SCIENCE, vol.45 No.11 pp.3067~3072, 2010김호경
◾ Development of a Shear Testing Machine for a Miniature Single Solder Ball Joint using Piezoelectric Loading Device, 한국윤활학회지, vol.26 No.1 pp.44~51, 2010김호경
◾ Fatigue Strength Evaluation of Adhesive Bonded and Mechanical Pressed Joints of Cold Rolled Steel Sheet, 한국안전학회지, vol.25 No.1 pp.1~8, 2010김호경
Conference Papers
◾ 조아유, 김호경, 이종소재를 접합한 다점 SPR 접합부의 피로강도 평가, 2023 한국자동차공학회 추계학술대회 논문집, 울산 UECO, 2023김호경
◾ 문정준, 이채은, 김호경, 나노인덴터를 이용한 무연솔더의 기계적 물성 측정 및 피로해석, 한국윤활학회 68회추계학술대회, 부산, 2019김호경
◾ 한정진, 황원태, 김호경, Self Piercing Rivet 성형 시 잔류응력 분포, 한국윤활학회 제68회 추계학술대회 논문집, 부산, 2019김호경
◾ 고재오, 한동운, 강세형, 김호경, 다양한 온도에서의 전기 접점의 미동마멸부식에 대한 접촉하중 영향, 제64최 추계 윤활학회 학술대회, 서울, 2017김호경
◾ Dongwoon Han, Minjung Kim, Sehyung Kang, Hokyung Kim, Effect of normal forces on fretting corrosion of electrical contacts., 4th International Tribology Symposium of IFToMM, Jeju,Korea, 2017김호경
◾ 황성완, 김민정, 곽진구, 한동운, 김호경, 나노 다이아몬드 입자를 첨가한 윤활유의 알루미늄 합금에 대한 마모 특성, 2016년도 한국윤활학회 제63회 추계학술대회 논문집, 무주, 2016김호경
◾ 김광수, 오만진, 곽진구, 한동운, 김호, 주석 도금 전기 접촉부의 미동마멸부식에 대한 윤활유 영향, 62회 한국윤활학회 춘계학술대회 논문집, 대전, 2016김호경
◾ 김민정, 오만진, 황재현, 강세형, 김호경, 오일 윤활 조건에서의 주석 도금 전기 접점의 미동마멸 부식, 추계학술대회논문집, 대구, 2015김호경
◾ Ho-Kyung Kim, Evaluation of fatigue endurance for an ultra lightweight inline skate frame, Adv. Mat. Research, Beijing, 2013김호경
◾ Ho-Kyung Kim, Novel service lifetime estimation for an oil-damper rubber bush for a railway vehicle, Adv. Mat. Research, Beijing, 2013김호경
Books
◾ Introduction to Fatigue Analysis, Chungmunkag, 1999.
Patents
◾ 자전거의 핸들바 접이장치, 특허 등록, 대한민국, 2017김호경
◾ 외팔보의 응력 해석 실험 장치, 특허 등록, 대한민국, 2014김호경
◾ 초소형 인장시험기, 특허 출원, 대한민국, 2011김호경
Projects
1. FEA analysis on a double impact golf driver, 2008.1.10-2008.4.10, Reeim Korea.
2. Design of major components for mega class vertical wind power generation, 2006.12.1-2007.2.28. I R Windpower.
3. Development of a micro-impression creep testing device and creep behavior of lead-free solder micro-joint using the device, 2006.11.1 - 2007.10.31, Korea Research Fund.
4. Development of inline skate 845 frame with light weight and high stiffness development using CAE analysis, 2006.6.1-2007.5.31, Korean Industry and University Cooperation.
5, Development of a torque wrench using strain gages, 2006.4.1 -2008.9.30, Korea Automation Technology Co.
6. Development of a compact testing device for characterizing mechanical properties of nano-scale thin films, 2004.9.-2006.8, ExpressLab.
7. A study on the development of an ultrafine grained high strength pure titanium with good bio-compatibility for dental implant and analysis of its fatigue properties. 2003.12-2005.11, Korea Research Fund.
◾ 연속공정 적용이 가능한 Al 용접재용 Bobbin Type Wire 용 Billet 소재 기술개발, 중소기업기술정보진흥원, 2019.06.~2020.05.김호경
◾ Failure analysis of die casting pins for an aluminum engine block, 산학협력단, 2019.03.~2020.02.김호경
◾ 자동차 전장 커넥터 방수 시일의 유한요소해석, 산학협력단, 2018.05.~2019.02.김호경
◾ 전기 접점의 미동마멸부식에 대한 연구, 산학협력단, 2018.04.~2018.12.김호경
◾ Effect of normal forces on fretting corrosion of tin-coated electrical contacts, 산학협력단, 2017.07.~2017.12.김호경
◾ Fatigue Strength of Self-Piercing Riveted Joints of Steel and Magnesium Alloy Sheets, 산학협력단, 2017.03.~2017.12.김호경
◾ 다이케스팅 금형 핀의 내구성 향상을 위한 피로파괴 예측기법 연구, 현대엔지비(주), 2016.11.~2017.11.김호경
◾ 엔진룸 정션블록 PV 복합환경시험 시 커넥터 단자의 이상발열현상에 대한 원인분석, (주)경신, 2016.07.~2016.08.김호경
◾ 시장 창출을 위한 젊은 세대용 감각적 캐릭터 금고(Character Safe) 개발 및 제작, 중소기업청, 2016.06.~2018.06.김호경
◾ 공학교육혁신 B/E/S/T Practice Model 구축, 한국산업기술진흥원, 2016.03.~2018.02.김호경
◾ 열시효 처리된 무연 솔더 볼 연결부의 충격전단강도 평가, 산학협력단, 2015.10.~2016.02.김호경
◾ 교반기 설계시의 C.A.E. 응용분야 및 연구수행 자문, 주식회사 플로우마스터, 2015.10.~2015.12.김호경
◾ 서울메트로 2호선 신조전동차 200량 차체 구조해석 및 충돌해석, (주)로윈, 2015.06.~2015.10.김호경
◾ 이종재료 self-piercing rivets 접합부의 인장-전단 피로강도, 산학협력단, 2015.05.~2016.04.김호경
◾ 셀프 피어싱 리베팅한 Al-5052 접합부의 피로강도 평가, 산학협력단, 2015.05.~2016.04.김호경
◾ 하/폐수처리 설비용 산기관 고무 멤브레인의 성능 및 내구성을 고려한 최적화 설계 기술, 한국생산기술연구원, 2014.11.~2015.02.김호경
◾ 자동차용 커넥터 SEAL 표준화 수립, (주)유라코퍼레이션, 2014.07.~2014.12.김호경
◾ 입축 소화조 교반기의 교반효율 평가를 위한 CAE 해석, 주식회사 플로우마스터, 2014.05.~2015.05.김호경
◾ SPR 접합법을 이용한 AI-5052 인장-전단 시험편의 피로강도, 산학협력단, 2014.04.~2015.03.김호경
◾ 일정 변위 진폭 조건에서의 은도금한 커넥터의 미동 마멸부식 거동, 산학협력단, 2014.04.~2015.03.김호경
◾ 단과대학, 학과행정실 및 대학본부 행정지원인력 재배치 방안 정책연구, 산학협력단, 2014.04.~2014.09.김호경
◾ 온도변화에 따른 주석 도금한 전기 커넥터의 미동마멸 부식 거동, 산학협력단, 2014.04.~2015.03.김호경
◾ 냉간압연판 판재 기계적 접합부의 십자형 인장 하중하에서의 피로강도, 산학협력단, 2014.03.~2015.02.김호경
◾ 2013년 청소년 미래상상 기술경진대회 시작품 제작(각종 커브길 사고를 예방할 수 있는 속도를 측정하는 LED가이드 레일), 한국산업기술진흥원, 2013.08.~2013.11.김호경
◾ 탄두시스템 생존성 및 관통현상 연구용역(금속초고속 충돌파괴 전산모사 S/W개발), 국방과학연구소, 2013.06.~2015.11.김호경
◾ 요소부품 해석 및 개선을 통한 업그레이드, 메탈젠텍주식회사, 2013.06.~2014.05.김호경
◾ 압축 교반기 부품 구조해석, 주식회사 플로우마스터, 2013.05.~2013.05.김호경
◾ 소형 솔레노이드 밸브 구조해석, 메탈젠텍주식회사, 2013.04.~2013.05.김호경
◾ BLDC re-comp 토출 밸브 신뢰성 평가법 연구, LG전자 주식회사, 2013.04.~2014.03.김호경
◾ 산악용 자전거 프레임의 피로 내구성 평가, 산학협력단, 2013.03.~2014.02.김호경
◾ 혼합모드 하중조건에서의 철도 차륜재의 피로균열 실험에 관한 연구, 산학협력단, 2013.03.~2014.02.김호경
◾ 고속 변형률 속도에서의 무연 솔더 볼 연결부의 강도 평가, 산학협력단, 2012.09.~2013.02.김호경
◾ 2012년 청소년 미래상상 기술경진대회 시작품 제작(어디든 찰칵! 철할 수 있는 암수 스테이플러), 지식경제부, 2012.08.~2012.11.김호경
◾ 알루미늄 원자재 품질관리를 위한 초소형 시험 평가시스템 개발, 케이씨 알테크(주), 2011.10.~2012.03.김호경
◾ 2011 청소년 미래상상 기술경진대회 시작품 제작(Triangle), (사)대학산업기술지원단, 2011.08.~2011.10.김호경
◾ 고강도 AI-Sc alloy를 이용한 자전거 프레임 및 크랭크 개발, 일진경금속, 2010.06.~2011.05.김호경
◾ 무연 단일 솔더 볼의 혼합모드 상태에서의 충격 파괴거동 및 충격 피로강도 평가, 한국연구재단, 2010.05.~2012.04.김호경
Miscellaneous
Members of SAE(Society of Automotive Engineers), Korean Society of Automotive Engineers, Korean Society of Mechanical Engineers, TMS(The Minerals, Metals & Materials Society), Korean Society of Railway Engineers, Korean Society of Tribologists & Lubrication Engineers, Korean Society of Safety Engineers
232 Gongneung-ro, Nowon-gu, Seoul, 01811, korea Tel :+82-2-970-6794 Fax : +82-2-970-6800
Copyright © Seoul National University of Science&Technology. All rights Reserved.